SEON Explorer Instrukcja Konfiguracji Pobierz pdf (Strona 12)

Explorer MX-HD Install and Setup Guide

700-0159

R003

To wire the Wake on Alarm feature with a Diagnostic Button:

1 On the Diagnostic Button cable, cut the green wire just before it enters the socket. See Figure 7.

2 Extend and connect the green wire to an input wire on the Signal harness.

3 Configure the DVR Alarm settings as described above.

Figure 6

Configuring Alarm 1 for Wake on Alarm

Important: If you are using the Diagnostic Button and cable, and require the Wake on Alarm feature, the

Diagnostic Button cable must be rewired as shown in Figure 7.

Figure 7

Wiring the Alarm Button and Signal harnesses for the Wake on Alarm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Brak uwag

SEON Explorer Instrukcja Konfiguracji Strona 12